Questions? Give us a call! 847.395.6556|info@mhpgrills.com

WLFT1 | WOLF STAINLESS STEEL TUBE BURNER

Home/Wolf, Burners, Stainless Steel Tube Burners, New Additions, New Burners/WLFT1 | WOLF STAINLESS STEEL TUBE BURNER

WLFT1 | WOLF STAINLESS STEEL TUBE BURNER

$100.20

In stock



STAINLESS STEEL TUBE BURNER

FITS:

  • Wolf

SIZE: 20-7/8″ Long

SKU: WLFT1

OEM: 816268

UPC NUMBER: 097524199372

To ensure you choose the correct replacement part for your grill, we recommend removing the original part and comparing it to what we list. You can also check your owner’s manual to make sure this part will work with your grill.

Description

WLFT1 | WOLF STAINLESS STEEL TUBE BURNER

  • Aftermarket stainless steel tube burner for many Wolf brand grills
  • Measures 20-7/8″ long
  • Commonly used with WLFHP1 stainless steel heat plate
  • More than one burner may be required for your grill
  • American-Made

Tips

Do you need a new burner?

You know it is time to replace your burner when:

  • The flame ports surrounding the burner are no longer uniform in size and have merged into larger holes. (This often occurs when the holes become clogged, more gas is forced through fewer holes thereby putting too much pressure on the remaining holes)
  • You see large flames coming from the top of the burner (or the sides). This means that there may be a break in the burner.
  • There are weak or holes points in the material of the burner

Installation

Tube Burner Installation Instructions

WarningTurn gas off at supply before working on the grill. No smoking or Open Flame!

  • Remove old burner: There may be screws, pins or other fastening devices that hold the burners in place. Carefully note the disassembly process as reassembly is essentially the opposite procedure.‌

    Now is a good time to clean the grill’s interior of debris, accumulated good, grease, etc.

    Cleaning the Interior of your grill
  • Install new burner. Refasten as originally installed. The burner should go over the valve orifice 1/4″ to 1/2″ similar to the original.
    Install Tube Burner
  • Test Burner: Turn on the gas and light the replaced burner noting the flame pattern. Wait several seconds. The flame should be even and mostly blue, although some yellowness will normally occur.

    Careful, parts may be hot!
    If adjustment is necessary, loosen the air shutter screw and rotate the air shutter slowly in either direction until the correct flame is attained. Re-tighten the screw.

    Flame should be mostly blue with minimal yellow tips

Additional information

Weight1.1 lbs
Dimensions20.875 in
Brand

Model Number

, , ,

Product Number

WLFT1

Size

OEM #

816268

Reviews

There are no reviews yet.

Be the first to review “WLFT1 | WOLF STAINLESS STEEL TUBE BURNER”

Your email address will not be published. Required fields are marked *

You may also like…