DUAL OVAL BURNER/VENTURI COMBO FOR PHOENIX GRILLS
3 Year Limited Warranty
FITS: Phoenix Grills
SKU: OBSPH34
SIZE: 15″ L x 4″ W, 10-1/2″ between bolts
MFG PART NUMBER:
UPC NUMBER: 097524191970
OBSPH34 | PHOENIX STANDARD STAINLESS STEEL BURNER
Description
General Description
OBSPH34 Dual Oval Burner/Venturi Combo for Phoenix Grills
3 Year Limited Warranty
Includes:
- Two attached mounting stud bolts with wing nuts
- Attached mounting bracket for ignitor electrode/collector box (ignitor/collector box sold separately, see part IG5B)
- Two venturi gas feed tubes with air/fuel mixture adjustment shutters and insect screens
The burner is 15″ L x 4″ W with 10-1/2″ between bolts
Replacing the burner
| REMOVAL OF OLD BURNER |
|
|---|---|
| Step 1: Remove your cooking grid and set aside  |
|
| Step 2: Remove your grease bucket and unscrew the drain valve from the end of your drain pipe  |
|
| Step 3: Pull your drip pan out from your grill and set aside  |
|
| Step 4: Unscrew the (2) wing nuts holding the burner in place located on the underside of your grill  |
|
| Step 5: Remove the burner & venturi assembly from the inside of the grill using an up and backward motion  |
| INSTALLING A NEW BURNER | |
|---|---|
| Step 1A: Make sure that burner support pins go through the holes in the bottom of the grill pit  |
|
| Step 1B: Remove wing nuts & install your new burner & venturi assembly into the grill pit |
|
| Step 1C: Making sure the venturi tubes fit over the orifice 1/4″ to 1/2″ (as shown)   |
|
| Step 2: Secure the burner in place by screwing the wing nuts to the burner supports located on the underside of the grill pit |
|
| Step 3: Reinstall your drip pan |
|
| Step 4: Reinstall your drain valve to the drain pipe and hand the grease bucket |
|
| Step 5: Replace your cooking grid |
