Questions? Give us a call! 847.395.6556|info@mhpgrills.com

CUK1 | GRILL CLEANUP KIT

$28.05

MSRP

Grill Clean-up Kit includes everything you need to give your black grill the makeover it needs.
Kit Includes:

  • Grill Degreaser
  • Flat High Temp Grill Paint
  • Steel Wool

SKU: CUK1

UPC NUMBER: 097524129072

Description

General Description

Grill Clean-up Kit includes everything you need to give your black grill the makeover it needs.
Kit Includes:

  • Grill Degreaser
  • Flat High Temp Grill Paint
  • Steel Wool

SKU: CUK1

UPC NUMBER: 097524129072

**High Temp Grill Paint is only for use on the outside of your grill**

> DO NOT USE ON HOT GRILL OR GRILL IN OPERATION
> USE IN WELL-VENTILATED AREA

Use Instructions

> DO NOT USE ON HOT GRILL OR GRILL IN OPERATION
> USE IN WELL-VENTILATED AREA

DEGREASER

  • Before applying Degreaser Solvent to your gas, electric or charcoal grill, make sure unit is turned off and at ambient temperature.
  • Wear rubber gloves and use in a well-ventilated area.
  • Clean the grill dry using steel wool or wire brush. Apply Degreaser and allow to soak for 15 minutes. Use a wire brush or abrasive pad on heavy grease accumulations.
  • Flush with water and wipe with a wet rag or paper towel.
  • A second application may be necessary for heavily greased areas.
  • Allow to dry completely before painting.

PAINT

BEFORE PAINT PREP WORK

  • The surface must be free of grease, rust & wax
  • Mask off or protect areas from overspray
  • Allow can to warm to room temperature before use
  • SHAKE can until metal ball rattles, then continue to shake for at least two minutes. When it stops rattling, you have shaken it up completely.

PAINTING

  • Move can with smooth, even, dusting strikes, letting paint become tacky between coats
  • Only apply enough paint for coverage; excessive spraying may result in runs
  • Never spray with the valve partially open; press the spray tip all the way down
  • If spray stops or becomes irregular, rotate spray head from side to side without removing from the valve. This will usually clear the spray head.
  • After use, invert can and spray for 2-3 seconds to clear the valve and spray tip before storing

Additional information

Brand

,

Model Number

OEM #

Size

Go to Top