Following these simple instructions will help avoid scratching or damaging the finish and keep your stainless steel attractive.
Thoroughly clean stains, food, and grime using a sponge or damp cloth with warm water and mild dish soap. Use Fantastik or Formula 409 to remove heavier soil.
Thoroughly rinse all surfaces and dry them completely with a clean towel. Do not allow stainless steel to air dry.
We strongly recommend that you apply a surface protectant to all exposed stainless steel surfaces.
Spray a small amount of WD-40 or Sheila Shine on a piece of paper towel and rub with the grain over the surface of the appliance. Using a clean terry cloth or paper towel, polish the appliance by rubbing with the grain until excess liquid is removed and the surface shines. It should not be oily to the touch, however, some residue is acceptable.
Furniture polish, such as Old English, can be effective for polishing stainless steel and protecting the surface.
It is a common misconception that stainless steel does not rust. It does not stain, corrode, or rust as easily as ordinary steel (it stains less), but it is not stain-proof. If not properly protected and maintained, it can corrode, pit, and discolor.
Because salt will accelerate rust and corrosion, grill or barbecue island owners who live near the beach need to be diligent in maintaining their stainless steel hardware. You need to clean and polish your stainless steel frequently, apply a protectant, and ensure water does not collect and puddle.
There are two methods of rust removal we recommend:
1. Rust removal with Instant Rust Out:
Spray exterior stainless steel surfaces with Instant Rust Out. Let it stand for about 30 seconds, then wipe with a clean cloth. Apply a second time if necessary.
Instant Rust Out will leave a white residue which can be rinsed off with water. Wipe the grill dry with a clean cloth and apply Sheila Shine or WD-40 as a surface protectant.
2. Rust removal with WD-40 or Sheila Shine:
Spray exterior stainless steel surfaces with WD-40 or Sheila Shine and wipe down with a dry cloth or paper towel until surface is free of rust. If there is significant rust or corrosion, use a Scotch-Brite scrubber.
Both of these products will act as a surface protectant and help resist smudges, stains, and rust.